Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step ⋆ Major Solution Platform

Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step

Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step

Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step
Today’s solution for Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step, device needs to  open diagnostic port, no need of 9008 mode and first open diag port after that write imei with given methods. Okey, not just opening Diag port, a lot has to been done.

To Repair Infinix Hot S3 X573 imei And Fix Unknown Baseband, The following method is recommended:

Requirements & Files To Download

Procedure 1[Flashing Factory Firmware For Infinix X573 Hot S3[Recommended Steps:

  • Extract Infinix Hot S3 X573 Factory Firmware you downloaded above to a convenient location on your Computer(Desktop Preferable)
  • Open NCK Box Qualcomm Module Or UMT QC Fire.
  • For UMT QC FIRE, check Program and Patch, click on the three dots at the right hand side[RHS], go to the folder you extracted the Factory Firmware Package and select rawprogram0.xml and open, no need to select patch manually.
  • Make sure Protect imei/Calibration Data Is Checked. You Can refer to screenshots below
  • Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step
    Infinix Hot S3 X573 imei Repair
  • Boot device to Edl mode, you can refer to this article below for Infinix Hot S3 X573 EDL Schematics
  • Infinix X573 Hot S3 Edl Test Point Schematics
  • Once you are sure you have connected device in edl mode, confirm in Device Manager for Qualcomm hs usb qdloader 9008 and press Flash
  • Wait for flashing process to complete, it should take at least 10mins, depending on your Computer’s speed.

Note: The Factory Firmware is the one that comes with incomplete Apps, with no Playstore, and this enebles you to modify device imei data easily.

  • Once device is on Factory firmware, enable oem and usb debugging and connect to Computer, check Device manager for diag port, if present, proceed to the next step…
  • Go to UMT QC Fire, click on Repair IMEI, you’ll be prompt with a warning screen, click Yes to continue
  • Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step
  • You’ll be prompted to select diagnostic port,  click Ok.
  • Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step
  • Another interface will pop up, click on Refresh and Ok
  • Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step
  • Once diag port is selected, you will be presented with the device Original Imei box 1 and 2, refill your desired imei data for Sim 1 &2 and press Ok.
  • The process will begin by backing up qcn and efs necessary for  imei repair.
  • Hold on… in the process, the device will be rebooted, during this time, you should allow the device to be fully booted up, then click Ok on umt qc fire twice{2x}
  • Click Refresh and  select diag port once again and press Ok.
  • Wait for the finalization process, this is when the repair takes place; and all necessary efs and qcn initially backed will be restored! As soon as you get the Finished notification, disconnect device, go to developers option and re-enable OEM & USB DEBUGGING, factory reset device from settings, wait for the erasing process to complete, it normally takes about 3-5mins, sometimes after completion, device goes off, turn it on again
  • Confirm your new imei by dialing *#06#. well done!!!

With the above process you should be able to write a new imei to your device, at this stage, you’ll be left with the firmware that comes with incomplete Apps, no playstore, No Google Apps.

If You Have Already Damaged Baseband Of Your Infinix X573 Hot S3, Flash efs file below with UMT QC FIRE below via EDL MODE

To Fix Infinix Hots S3 X573 Incomplete Apps, Follow This Page Below

To Fix Unknown Baseband Properly, Download EFS Dumb Below

Sharing is caring!

4 thoughts on “Infinix Hot S3 X573 imei Repair And Unknown Baseband Step By Step

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Translate To Your Language»
shares